You are here Safety Equipment

Alat Teknik - PD. Karya Mitra Usaha

ALAT UKUR KETEBALAN CAT - ALAT TEKNIK

Alat Ukur Ketebalan Cat

Alat Ukur Ketebalan Cat - ALAT TEKNIK

Meet ISO 2178, DIN, ASTM and BS
Application:can measure the thickness of non-magnetic layers on magnetic substrate
Manual or automatic shut down
Two mesuring mode
Wide Measuring Range and high resolution
Metric / Imperial conversion
Digital Display give exact reading
Can communicate with PC computer for statistic and printing by optional cable
Display : 4 digits, 10mm LCD

Range   : 0 ~ 1250 µm / 0~50mil
Resolution : 0.1 µm (0~99µm), 1µm for over 100µm
Accuracy : ± 1 to 3% or 2.5µm or 0.1mil which ever is the greater
PC interface with RS 232 interface
Power : 4 x 1,5AAA (UM-4) battery
Operating Condition : Temp 0 to 50ºC, Humidity
Size : 126 x 65 x 27 gr

Price :

Type KMCM8825-F (Basic Ferro only)
Range 0 to 1250µ         Rp 5,500,000
Range Rp 0 to 2000µ   Rp 7,500,000
Type KMCM8825-FN (Basic Ferro and Non Ferro)

Range   : 0 ~ 2000 µm   Rp 8,000,000
Thickness Gauge Consist :

- Main Unit
- Probe
Accessories :
- Carrying case 1Pcs
- Operation Manual 1 Pcs
- Calibration Foils 1 set
- Substrate  1 Pcs
Optional :

- Cable & Software for RS232C

Microprocessor - COATING THICKNESS GAUGE  - KMCM8826-FN Alat Ukur Ketebalan Cat

Alat Ukur Ketebalan Cat - alat teknik

Type FN (Basic Ferro and Non Ferro)
Magnetic induction (F Type)
Application: Can measure the thickness of non-magnetic coating layers on magnetic substrate.
For example: (aluminum, chrome, copper, enamel, rubber) on magnetic substrate(steel, iron, alloy and magnetic stainless steel)
Magnetic induction (NF Type)

Application: Can measure the thickness of nonconductive coating layers covered on nonferrous substrate.
For example: (enam1, rubber, paint, vanish, plastic anodic-oxide layer) covered on nonferrous substrate (aluminum, brass, zinc, tin and nonmagnetic stainless steel)
PRICE


IntellSafe - COATING THICKNESS GAUGE - FERRO BASIC TYPE - KMAR930
Alat Ukur Ketebalan Cat pada Besi (Ferro Basic)

Alat Ukur Ketebalan Cat pada Besi - alat teknik

Range : 0 to 1,800 µm
Resolution : 0.1 µm/1µm
Accuracy : ±3%+1
LCD Display 3 ½ display

Power Supply : 9 Volt
Operation temperature : 0 to 40ºC
Operation Humidity : 0 to 95% rH
Dimension : 67 x 30 x 183 mm
Weight : 147 gram
- Measuring non magnetic coating on magnetic conductor base material

- Minimum Sample diameter 12 mm
;- Minimum Substrate thickness : 0.5 mm
- Minimum Curvature radius : convect 2mm, Concave 11mm
- Using Sensitivy sensor for precise measurement
- Data record, recall, deleted function
- Data analisys, average, Maximum, Minimum, standard deviation and measuring time
- Beef sound indication
- Metric / Imperic unit selection
- Low Battery Indication
- Auto power off      

Untuk Alat Teknik Anemometer, Cable Heigh Meter, Coating Thickness Gauge, Earth Resistance, Gas Detector,  Alat Teknik Vibration Meter, Alat Civil  Dan Alat Teknik  lainnya dapat menghubungi kami melalui email:
E-Mail    :  This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Telp.     :  021-30063681 , 021-62310892
Fax       :  021-62320340
Mobile   :  081383297590



Alat Ukur - Alat Teknik - Alat Instrument - Alat Civil - Alat Safety